SpaceClaim Online Help

Chamfer the top edge

1. ChamferSloping corner between two edges created using the Pull tool; angle with equal setback; bevel. the top edge using the PullTool used to distort or deform geometry. Use the Pull tool to offset, extrude, revolve, sweep, draft, and blend faces; or to round, chamfer, or extrude edges. When converting a sketch to 3D, pulling a line creates a surface and pulling a surface creates a solid. tool.

   1. Click the PullTool used to distort or deform geometry. Use the Pull tool to offset, extrude, revolve, sweep, draft, and blend faces; or to round, chamfer, or extrude edges. When converting a sketch to 3D, pulling a line creates a surface and pulling a surface creates a solid. tool in the Edit ribbon group.

   2. Double-click one of the top edges to select the edge loop.

       

      

       

      NoteAnnotation placed on a design, drawing sheet, or 3D markup. Notes contain text or symbols that you insert and can be connected to geometry by a note leader. that double-clicking the same edge multiple times shows you each edge loop set the edge is part of. If the wrong edge loop is selected, double-click to select an alternate loop.

       

   3. Select the chamfer edge option in the Options panelArea of the user interface that enables you to modify functions specific to tools. or the mini-toolbar.

   4. Drag in the direction of the arrow to begin chamfering the edge.

       

      

       

      NoteAnnotation placed on a design, drawing sheet, or 3D markup. Notes contain text or symbols that you insert and can be connected to geometry by a note leader. that chamfers are 45 degrees by default, but you can change the distance of each side.

       

   5. While dragging, use the space bar to enter a value of 0.1" for the chamfer’s setback.

   6. Press Enter to finish pulling and create the chamfered edges.

2. Save your work.