Deleting Mesh Controls

Select a face or edge that has a size control.
Press Delete.
The size control is deleted. If the face or edge is meshed, then the mesh is updated.

Select a face that has a map/sweep mesh control.
Press Delete.
The map/sweep mesh control is deleted. If the face is meshed, then the mesh is updated, which will also update the solid mesh if applicable.
Note: Alternatively, you can right-click the control and select Delete to remove it. Make sure you have the control highlighted, as this delete will remove anything you have selected. The mesh remains but may be updated, and can be deleted from the geometry structure separately.

Select a face that has a boundary layer control.
Press Delete.
The boundary layer control is deleted. If the face is meshed, then the mesh is updated.

Note: If a face or edge has more than one mesh control, all controls will be deleted by this operation.

Right-click to select the control, and then select Delete from the context menu to remove the control. Make sure you have the control highlighted - you may need to use the Ctrl key and scroll wheel. You may select either the high or low side of the Match control.
Press Delete.
The match control is deleted. If there is another mesh control applied, for example a size control, then the low side mesh will be updated and the high side mesh remains under the other mesh control.