Select the view.

Modify the values in the Properties panelArea of the user interface that displays editable details about the selected object(s). This panel is initially displayed on the lower left side of the screen, but can be moved., or right-click and select a style from the mini-toolbar. Change the:

• Orientation to change the orientation of the view to isometric, trimetric, or any side. If you change the orientation of a general view from which projected views were created, the orientation of the projected views also change.

• RenderingModeThree ways of designing: Sketch, Cross-section, or 3D. You can switch between modes at any time. available from the Properties panel for a view on a drawing sheet. Use Rendering mode to change the Graphics style for the view. Select Inherit if you want to link the graphics style to the parent view. See Graphics styles. mode to change the graphics style for the view. Select Inherit if you want to link the graphics style to the drawing sheet.

• ScaleSolidObject that encloses volume. A surface becomes a solid if it encloses volume. or surface: Change the size of the selected object using the PullTool used to distort or deform geometry. Use the Pull tool to offset, extrude, revolve, sweep, draft, and blend faces; or to round, chamfer, or extrude edges. When converting a sketch to 3D, pulling a line creates a surface and pulling a surface creates a solid. tool. You can scale dynamically or by entering a scale value. Drawing sheet or cross-section views: Magnify or shrink the view by selecting a View in the Structure tree and editing the Properties panel. to magnify or shrink the view. When you change the scale, the Type property changes to Independent from sheet. You can select Linked to sheet to set the scale to be the same as the scale used for the drawing sheet.

You can also adjust the appearance of your design on the drawing sheet by using the:

• Snap View tool to correctly position the design.

• Move tool to position the design more accurately.

When you modify the orientation of a general view, any views dependent on the general view are oriented simultaneously. Other general views do not change.

Select the General View tool .

Select the component from the Options panel.

As you move your cursor over the drawing sheet to place the view, the model you selected is previewed at the cursor location.

Click to place the view of the selected component on the drawing sheet.

The component is repeated in the Structure tree as a root node. You can place multiple internal components.

Select the General View tool .

Select the assembly from the Options panel.

As you move your cursor over the drawing sheet to place the view, the model you selected is previewed at the cursor location.

Click to place the view of the selected assembly on the drawing sheet.

The assembly appears in the Structure tree as a root node