| ANSYS Discovery SpaceClaim |
|
You can format the drawing sheet using a template, orient the page, and select a paper size for the sheet. When you select the format and size of the drawing sheet, Discovery SpaceClaim automatically sets the scale, but you can modify it.
Use the following tools in the Sheet Setup group to change a drawing sheet:
|
|
Format: Select a default or custom format, or remove the formatting from the drawing sheet with the Format tool. |
|
|
Orientation: Select a portrait or landscape orientation for the page from the Orientation drop-down list. |
|
|
Size: Select the page size from the Size drop-down list. |
|
Scale: Select a scale or type a ratio in the Scale field. For example, enter 1:1 to display views of your design at actual size. The values listed are the two most common ratios that are smaller and larger than the current scale ratio. |
Copyright © 2004-2017 ANSYS, Inc. All Rights Reserved. SpaceClaim is a registered trademark of ANSYS, Inc.
