SpaceClaim Online Help |
![]() |
Change the design from the drawing.
Change the size of the .3 diameter hole at the bottom of the bracket.
Turn the drawing so you can see inside the hole by clicking the Spin tool
in the Orient ribbon group and dragging to spin your design.
Click on the Design tab above the ribbon.
Enlarge the view by selecting Zoom Box In from the Zoom menu in the Orient ribbon and drawing a box around the hole.
Select the Pull tool in the Edit ribbon group then select the inside diameter of the hole. Press and release the spacebar and enter a radius of .2.
Zoom out. The dimension has been changed to .4 on the drawing.
Two views of the changed drawing.
To see the drawing view, right-click and select View > Flat View.
To view the whole drawing, right-click and select View > Home.
« Previous | Done |
© Copyright 2016 SpaceClaim Corporation. All rights reserved.