ANSYS Discovery SpaceClaim |
![]() |
Use the tools in the Analysis group to create or subdivide bodies for analysis.
|
Use the Volume Extract tool to create a solid based on an enclosed region within a part. |
|
Use the Midsurface tool to create a surface midway between two offset faces. |
|
Use the Split by Plane tool to split a part based on a plane. |
|
Use the Spot Weld tool to define points on two faces that represent weld points. |
|
Use the Imprint tool to imprint coincident faces. |
|
Use the Extend tool to extend surface edges or curves up to intersecting bodies. |
|
Use the Enclosure tool to detect coincident faces, edges, or vertices and imprint them to allow for mesh connections. |
Tools in the Remove group help you easily remove elements to simplify your designs.
|
Use the Rounds tool to remove rounded edges from a design. |
|
Use the Faces tool to remove features from a design. |
|
Use the Interference tool to merge parts that clash. |
Tools in the Detect group help you easily find geometry problems in your designs.
|
Use the Short Edges tool to find edges shorter than a specified length that may impact meshing results. |
|
Use the Overlap Faces tool to find faces that overlap. |
|
Use the Clearance tool to find small gaps between parts. |
Create and edit beam objects with the tools in the Beams group.
|
Use the Profiles tool to select a profile for a beam object. |
|
Use the Create tool to define a beam using a profile from the library. |
|
Use the Extract tool to define a beam and profile from a solid. |
|
Use the Orient tool to change the orientation or axis of the beam. |
|
Use the Display tool to change how beams are displayed. |
Copyright © 2004-2017 ANSYS, Inc. All Rights Reserved. SpaceClaim is a registered trademark of ANSYS, Inc.